Step 1: Install Your Scanner; Mounting Your Scanner In Your Dashboard; Mobile Mounting In Your Vehicle - Radio Shack PRO-2096 User Manual

The Basics

step 1: install your scanner

You can mount your digital trunking scanner in your vehicle,
install it for mobility, or install it as a base station.

mounting your scanner in your dashboard

If you are unsure about how to install your scanner in your
vehicle, consult your automobile manufacturer, dealer, or a
qualifi ed installer. Before installing, confi rm your scanner fi ts
in the desired mounting area and you have all the necessary
materials. Your scanner requires a 2 x 7
(50 x 180 x 135 mm) mounting area.
1. Remove the four rear screws and pull off the black case
before installing your scanner.
2. Install the DIN sleeve into the
opening in your dashboard, lip
facing out.
3. Push out the top and bottom tabs
to hold the sleeve fi rmly in
place.
4. Slide the scanner into the
sleeve until it locks in place.
To remove your scanner from
Note Note
the DIN sleeve, insert the two
keys straight into the scanner's
front panel. Then, remove the
scanner by pulling front panel.
When mounting in your
Note Note
dashboard, you will need to
connect an external antenna and an external speaker.

mobile mounting in your vehicle

You can mount your scanner under the dashboard, or on top
of it, using the mounting bracket.
1 5
/ x 5 /
8 16
11
inch