Video Out Settings - Pioneer DVR-220 Operating Instructions Manual

The Initial Setup menu
After automatic tuning, a summary channel mapping
screen is displayed.
Initial Setup
Channel Mapping Antenna
CH Skip CH Skip
9 Off
Off Off
2 10
Off Off
3 11
4 Off 12 Off
5 Off 13 Off
6 Off 14 Off
7 15
Off Off
8 16
Off Off
Press ENTER to return to the main menu screen.
Note
• If you want to cancel before tuning has finished,
press ENTER.
• You can manually tune and skip blank channels
using the Manual CH Setting, below.
Manual CH Setting
• Default setting: n/a
The channel skip function lets you skip channels where
there is no station so that as you change channels using
the CHANNEL +/– buttons or the number buttons, you
only change to channels that have a station.
The manual tuning function allows you to manually tune
to stations, should you need to.
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video Out VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback
1 From the manual channel setting screen:
• Use the CHANNEL +/– button to change channels.
• If you want to skip the displayed channel (because
there is no station assigned to that channel), change
the Skip setting to On.
• If you want to manually tune the displayed channel,
change the AFT (Auto Fine Tuning) setting to Off,
then move down to Level to manually tune to a
station.
Skip
AFT
Level
• To return to the Initial Setup menu, press ENTER.
1/3
CH Skip CH Skip
17 Off 25 Off
Off Off
18 26
Off Off
19 27
20 Off 28 Off
21 Off 29 Off
22 Off 30 Off
23 31
Off Off
24 32
Off Off
Next Screen
2ch
Off
Off
0
VCR Plus+ CH Setting
• Default setting: n/a
Guide channels are used by the VCR Plus+ system so
that the channel number specified in the VCR Plus+
programming numbers can be guaranteed to
correspond to the correct station.
1 Select 'VCR Plus+ CH Setting', then 'Next Screen'.
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video Out VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback
2 Assign channel numbers to the guide channels as
necessary.
Look in your TV guide to see which channel numbers
should be assigned to which guide channels.
Initial Setup
VCR Plus+ CH Setting
Basic Auto Channel Setting
Tuner Manual CH Setting Guide
Video Out VCR Plus+ CH Setting VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback
• Use the (cursor up/down) buttons to change
the guide channel for setting.
• Use the (cursor left/right) buttons to change
the channel number.
• Use the PREV / NEXT button to display the previous/
next 10 guide channels.
3 To return to the Initial Setup menu, press ENTER.

Video Out settings

Component Video Out
• Default setting: Interlace
You only need to make this setting if you connected this
recorder to your TV using the component video jacks.
Initial Setup
Basic Component Video Out
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
Next Screen
1/20
CH Guide CH
6
1 6
2 7
3 8
4 9
5 10
Interlace
Progressive
12
77
En