Standard Timer Recording - Pioneer DVR-220 Operating Instructions Manual

Recording
06
• The AUTO option automatically sets the best
recording quality for the space available on the disc
loaded at the time of recording.
3 Use
cursor to the recording start date and time on the
grid.
• You can move the cursor forward or back an hour at
a time using the
Easy Timer Recording
AM
8:
00
12/13
12/14
12/15
12/13
CHANNEL + / –
Each row of the grid is one day (you can set the timer
recording for up to a month in advance). Each column is
a 15 minute interval.
The darker area represents time that has already passed
and can't therefore be selected. The lighter area is time
that's available.
4 Press ENTER to set the start time.
The start date and time is displayed in the middle of the
screen.
• You can go back and reset the start time if you need
to by pressing RETURN.
5 Use the
cursor to the recording end time on the grid.
Easy Timer Recording
AM
11:
00
12/13
12/14
12/15
12/13
CHANNEL + / –
As you move the cursor around the grid, an arrow
stretches from the start time to the current cursor
position, representing the length of the recording. A
recording of up to 6 hours can be set.
46
En
(cursor buttons) to move the
and buttons.
Current time
Recording start time
PM
9: 10: 11: 12: 1: 2:
00 00 00 00 00 00
- -:- -
11:45
WED AM
32 FINE
REC MODE
(cursor left/right) to move the
Recording start time
Recording end time
PM
12: 1: 2: 3: 4: 5:
00 00 00 00 00
11:45 1:45
WED AM PM
32 REC MODE FINE
6 Press ENTER to set the end time.
7 Select 'Yes' to set the timer recording and exit, or
'No' to go back to the timer recording screen.
The timer recording indicator (
display to indicate the recorder is in timer recording
standby.
• You can check the timer recording details you just set
from the main timer recording screen (see Standard
timer recording below).

Standard timer recording

The timer recording screen you can see all the timer
programs already set, clear programs and set up new
ones.
1 Press TIMER REC to display the Timer Recording
screen.
You can also access the Timer Recording screen from
the Home Menu (press HOME MENU, select Timer
Recording, then Timer Recording (View)).
This screen shows all the timer programs currently set.
00
• The amount of free space available on the currently
loaded recordable DVD is shown towards the bottom
of the screen.
• In the lower-right corner, the number of timer
programs already set is shown next to Tmr Pgms.
) lights in the front panel
CLEAR
ENTER
HOME
MENU
PREV NEXT
TIMER REC
Timer Recording
Date Start Stop CH Mode Confirm
12/13 WED 7:00 PM 8:00 PM 32 SP
New Input
DVD Remain 1h00m(FINE)
OK
1/1