Display - Pioneer DVR-220 Operating Instructions Manual

Controls and displays

Display

1 2
1 PLAY
Lights during playback; blinks when paused.
2 REC
Lights during recording; blinks when recording is
paused.
3 PL (page 57)
Lights when a VR mode disc is loaded and the recorder is
in Play List mode.
4 PM
Lights to indicate PM (after midday) for the clock display.
5 2 3 (page 76)
Shows the remote control mode (if nothing is displayed,
the remote control mode is 1).
6 REM
Lights when the character display is showing the
remaining available recording time.
7 (page 77)
Lights when the component video output is set to
progressive scan.
8 V
Lights when an unfinalized Video mode disc is loaded.
9 R / RW
Indicates the type of recordable DVD loaded: DVD-R or
DVD-RW.
10 CH (page 27)
Channel indicator for the built-in TV tuner.
11 (page 44)
Lights when a timer recording has been set.
(Indicator blinks if the timer has been set but there
isn't a recordable disc loaded.)
AUTO (page 51)
Lights when Auto Start Recording has been set, and
during Auto Start Recording.
3 4 5
13
12 Recording quality indicators (page 42)
13 Character display
14 Channel recording indicators
15 OVER (page 79)
6 7 8 9 10
14 15
FINE
Lights when the recording mode is set to FINE (best
quality).
SP
Lights when the recording mode is set to SP
(standard play).
LP
Lights when the recording mode is set to LP (long
play).
EP
Lights when the recording mode is set to EP
(extended play).
MN
Lights when the recording mode is set to MN
(manual recording level) mode.
(page 78)
Indicates which channels are recorded when Dual
Mono is selected.
SAP (page 28)
Lights when the currently selected TV channel has a
Second Audio Program channel.
Lights when the analog audio input level is too high.
11 12
03
21
En