Manual Clock Setting; Auto Clock Setting - Pioneer DVR-220 Operating Instructions Manual

Getting started
After selecting Antenna or Cable the recorder starts
automatic tuning. This takes a couple of minutes to
complete.
Tuning
Cancel
6 Select 'Auto' for automatic time setting, then
press ENTER.
Initial Setup
Clock Setting
Basic Clock Set
Tuner On Screen Display
Video Out Front Panel Display
Audio In Remote Control Set
Audio Out Setup Mavigator
Setup Mavigator
Language
Recording
Playback
•

Auto clock setting

Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
Set 'Clock Set CH' to the channel preset number
that broadcasts a clock signal, then move the
cursor down to 'Start' and press ENTER.
Initial Setup
Auto Clock Setting
Basic Clock Set
Tuner On Screen Display
Date
Video Out Front Panel Display
Time
Audio In Remote Control Set
Clock Set CH
Audio Out Setup Mavigator
Setup Mavigator
Language
Recording
Playback
The recorder takes a short while to set the time. After you
see that the time has been set, select Next to proceed.
Initial Setup
Auto Clock Setting
Basic
Clock Set
Tuner
On Screen Display
Date
Video Out
Front Panel Display
Time
Audio In
Remote Control Set
Audio Out Clock Set CH
Setup Mavigator Setup Mavigator
Language
Recording
Playback
If the time could not be set automatically, press RETURN
to go back to the previous screen and select Manual.
7/68
Auto
Manual
2
Start
04 21 2003 MON
11 20 AM
2
Start
Next
•

Manual clock setting

If no stations in your area are broadcasting time
siganals, you can set the clock manually.
Use the (cursor left/right) buttons to set
your time zone.
Initial Setup
Manual Clock Setting
Basic
Clock Set
Tuner
On Screen Display
Video Out
Front Panel Display
Time Zone
Audio In
Remote Control Set
Audio Out
Setup Mavigator Setup Mavigator
D.S.T.
Language
Recording
Playback
Press (cursor down) then use the
left/right) buttons to set D.S.T. to On or Off, then
press ENTER.
Select On if you are currently using daylight saving
time.
Set the current date and time.
Initial Setup
Basic Manual Clock Setting
Clock Set
Tuner
On Screen Display
Date
Video Out
Front Panel Display
Audio In
Remote Control Set Time
Audio Out
Setup Mavigator Setup Mavigator
Time Zone
Language
Recording
D.S.T.
Playback
• Use the (cursor up/down) buttons to change
the value in the highlighted field.
• Use the (cursor left/right) buttons to move
from one field to another.
• Press ENTER to finish setting the time.
7 Select the kind of TV you have, 'Wide (16:9)' or
'Standard (4:3)'.
Initial Setup
TV Screen Size
Basic
Clock Set
Tuner
On Screen Display
Video Out
Front Panel Display
Audio In
Remote Control Set
Audio Out
Setup Mavigator Setup Mavigator
Language
Recording
Playback
Use the (cursor up/down) buttons to select, then
press ENTER.
1/2
USA
Alaska
Off
(cursor
2/2
WED
01 01 2004
AM
12 00
USA
Alaska
Off
Wide (16:9)
Standard (4:3)
04
25
En