Programming System - Pioneer DVR-220 Operating Instructions Manual

Recording
• Each row is for one timer recording program, with the
date and time information, channel, recording mode
and recording status.
• If there are more than eight timer programs already
set, press NEXT
to switch page (go back using
the PREV button).
• You can also clear a timer program by highlighting it
and pressing CLEAR.
2 Select 'New Input' to set a new timer program,
then press ENTER.
Timer Recording
Date Start
12/12 TUE 10 00 AM
Program Set
3 Enter the timer recording settings.
Use the (cursor left/right) buttons to select a field;
use the (cursor up/down) buttons to change the
value.
• Date – Choose a date up to one month in advance, or
select a daily or weekly program.
• Start – Set the recording start time.
• Stop – Set the recording end time (maximum length
of a timer recording is 6 hours).
• CH – Choose a channel (2–69 or 1–125 for antenna or
cable channels respectively, excluding skip
channels), or one of the external inputs from which to
record.
• Mode – Select FINE, SP, LP, EP or AUTO (See Setting
the picture quality/recording time on page 43). If
Manual Recording is on, then you can also select the
MN setting.
• Ttl Name Input – Optionally, you can enter a name
for the recording up to 32 characters. (Highlight
Program Set then press
this option.)
Stop CH Rec Mode
11 00 AM 26 SP
Ttl Name Input
(cursor down) to access
4 After entering all the timer recording
information, highlight 'Program set' and press
ENTER.
The timer recording list screen is displayed again. The
timer program you just input appears in the list.
• The rightmost column in the timer recording screen
(Confirm) shows whether there's enough space to
record your timer program. If you selected a daily or
weekly program, the date of the last recording that
will fit on the disc appears (up to a maximum of one
month ahead).
• If the timer program is too long to fit into the available
disc space, the message Time Over appears. The
program will record until the disc is full.
• If Optimized Rec (see Optimized Rec on page 82) is
set to On, the recorder will adjust the recording
quality to try and fit the recording on the disc. If the
program is too long even when recorded in EP
(extended play), the message Time Over appears.
• If there are already the maximum number of titles or
chapters on the disc, the message Title Over or
Data Over appears. (There can be up to 99 titles on
a disc.)
• If a timer program overlaps another in the list, the
message Overlap appears.
• If no recordable disc is loaded, the message Can't
Rec appears.
• Standby is displayed when the recorder is in timer
recording standby.
• Recording is displayed when a timer recording is in
progress.
5 To exit the timer recording screen, press HOME
MENU.
• If you change the Auto Channel Setting (from cable
to antenna or the other way around), existing timer
programs will be erased.
Timer recording using the VCR Plus+

programming system

This system makes programming timer recordings very
simple. Most TV guides publish PlusCode numbers with
their program details. If you want to make a timer
recording of a program, you just input the corresponding
code. The date, start, stop and channel settings are made
automatically. All you have to do is tell the recorder the
recording mode, and whether it's a once-only recording
or a regular recording.
06
®
47
En