Tuner Settings - Pioneer DVR-220 Operating Instructions Manual

The Initial Setup menu
12
On Screen Display
• Default setting: On
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
On the default setting, the recorder shows on-screen
operation displays (Play, Stop and so on). Change to Off
to hide these displays.
Front Panel Display
• Default setting: On
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
On the default setting, the time is shown in the front
panel display when the recorder is in standby. Switch to
Off to have the front panel display switch off completely
when in standby.
Note
• When set to Off, the display still lights dimly in
standby when setting a timer recording, or during
Auto Start Recording.
Remote Control Set
• Default setting: Recorder1
You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.
There are three different recorder IDs. When set to
Recorder2 or Recorder3, the remote control mode is
shown in the front panel display.
76
En
Clock Setting
On
On Screen Display
Off
Front Panel Display
Remote Control Set
Setup Navigator
Clock Setting On
On Screen Display Off
Front Panel Display
Remote Control Set
Setup Navigator
Clock Setting Recorder1
On Screen Display Recorder2
Front Panel Display Recorder3
Remote Control Set
Setup Navigator
After selecting a new recorder ID, you have to confirm the
change by selecting Yes or No (use the
left/right) buttons), then pressing ENTER.
Note that as soon as you change the recorder ID, the
remote becomes inoperative until you change the remote
to the same ID.
To set the remote, press and hold RETURN and a number
button (1, 2 or 3) until the indicator on the remote lights.
Setup Navigator
• Default setting: n/a
Initial Setup
Basic Clock Setting
Tuner On Screen Display
Video Out Front Panel Display
Audio In Remote Control Set
Audio Out Setup Navigator
Language
Recording
Playback
The Setup Navigator appears automatically when you
switch on the recorder for the first time (or after resetting
the recorder). It is also available from the Initial Settings
menu should you need it at any other time.
See also Switching on and setting up on page 24.

Tuner settings

Auto Channel Setting
• Default setting: Antenna
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video Out VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback
Auto Channel Setting automatically tunes the built-in TV
tuner to terrestrial broadcast TV channels or cable
channels. Select Antenna or Cable, depending on how
you receive your TV channels, then wait for the automatic
tuning to finish.
Tuning
Cancel
(cursor
Start
Antenna
Cable
7/68