Status Confirmation Using Onscreen Display (Osd) - Pioneer PRV-LX1 Operating Instructions Manual

Status Confirmation Using Onscreen Display (OSD)

Pressing the DISPLAY button on the unit's front panel or on the remote control unit will activate the onscreen
display (OSD). The OSD permits confirmation of the unit's current setting status and recording/playback
conditions.
7 Idling Condition Recording-Setting Confirmation Screen
Pressing the DISPLAY button when the unit is in the idling condition displays a listing of the unit's current
Status (settings). This allows the user to check settings before operating the unit without the need to
enter the Function Menu.
When the unit is in the idling condition, the OSD screen is composed of two pages. The first two times the DISPLAY
button is pressed, the OSD alternates between the two pages. When the DISPLAY button is pressed a third time
the OSD is turned off.
Main unit button
Remote control unit
Note 1:
When the destination drive is DVD, the project name is not displayed.
Project names are displayed only when HDD is designated as the destination drive.
26
PRV-LX1
En
OSD Page 1
OSD Page 2
Drive selected
(Note 1)
Project name
Video source
Video encoding rate
Video filter label
Audio input source
Audio encoding format
Remaining HDD capacity
Time code input source
Input time code data
External sync
Control mode
Video aspect ratio
Chapter mark input
method