VTech A2100 Master User Manual page 36

Appendix
Troubleshooting
For cordless telephones:
The telephone does not ring when there is an incoming call.
•
•
• Adjust the setting of RF transmission power (page 20
•
• Other electronic products such as HAM r
installing your phone as far away as possible from these types of electronic devices
•
•
• Remove and install the battery again and place the cordless
Cordless handset beeps and is not performing normally.
•
• Move the cordless handset closer to the telephone base or adjust the setting of RF transmission power ( ( page 20
•
• Other electronic products such as HAM r
installing your phone as far away as possible from these types of electronic devices
There is interference during a telephone conversation or the call fades in and out when I am using the cordless handset.
• Move the handset closer to the telephone base or adjust the setting of RF transmission power ( ( page 20
•
•
• Other electronic products such as HAM r
installing your phone as far away as possible from these types of electronic devices
•
•
•
•
I hear other calls when using the telephone.
•
I hear noise on the cordless handset and the keys do not work.
•
Common cure for electronic equipment.
•
following (in the order listed):
page 13
p
p
p
33 33 33