VTech A2100 Master User Manual page 35

Appendix
Troubleshooting
For cordless telephones:
The telephone does not work at all.
•
•
• Make sure the battery is installed and charged correctly (page 14
•
•
•
•
•
There is no dial tone.
•
• Move the cordless handset closer to the telephone base or adjust the setting of RF transmission power (page 20
•
•
I cannot dial out.
•
•
•
•
The LOW BATTERY LED illuminates on the cordless handset.
•
• Remove and install the battery again and use it until fully depleted, then charge the cordless handset in the telephone base or
•
The battery does not charge in the cordless handset or the battery does not accept charge.
•
•
•
The CHARGE LED is off
•
•
The CHARGE LED is off.
• Clean the charging contacts on the cordless handset, telephone base and charging base each month with a pencil eraser or a dry
•
•
CHARGE
32 32 32
LOW BATTERY
CHARGE
LOW BATTERY