Setting Analog Audio Connections To An Av Amplifier Or Receiver - Pioneer DV-K302CD Operating Instructions Manual

Setting analog audio connections
to an AV amplifier or receiver
The [Analog Jacks] screen establishes whether analog
connections have been made to an AV amplifier or
receiver, and if connections are made, whether the
connections made are for 2 channel stereo or for 5.1
channel surround sound.
Audio1
Setup Navigator
Amp Connection
2 channel jacks for L/R
Settings: 2 Channel*
Select if you have made 2 channel connections
to an amplifier or receiver.
5.1 Channel
Select if you have made 5.1 channel
connections to an AV amplifier or receiver with
the appropriate inputs. When this setting is
selected, several screens will follow to
determine the configuration of your speaker
system. These screens are described in the
section 'To coordinate your speaker system for
5.1 channel output' on this page.
Not Connected
Select if you have not made analog audio
connections.
Note
Connect the ANALOG AUDIO OUT jacks to the AV amplifier or
receiver to use the Karaoke function. You cannot use the
Karaoke function with the DIGITAL OUT jack.
24
2 Video Language General
2 Channel
Analog Jacks
5.1 Channel
Not Connected
Move Select Exit
ENTER SETUP
* Factory setting
To coordinate your speaker system for 5.1
channel output
When "5.1 channel" is selected in the [Analog Jacks]
screen, the following screens appear to determine the
configuration of your speaker system. In all of the
following screens, select "Present" if the speaker in
question is present in your system, and "Not Present" if
it is not.
[Center Speaker]
Audio1 2 Video Language
Setup Navigator
Amp Connection
Center Speaker
Center speaker is connected
to an amplifier
Move
[Surround Speakers]
Audio1 2 Video Language
Setup Navigator
Amp Connection
Surround Speakers
Surround speakers are connected
to an amplifier
Move
[Sub-woofer]
Audio1 2 Video Language
Setup Navigator
Amp Connection
Sub-woofer
Sub-woofer is connected
to an amplifier
Move
Settings: Present*
Not Present
Note
If "Not Present" is selected for both [Center Speaker] and
[Surround Speaker], [Sub-woofer] is automatically set to "Not
Present" and the [Sub-woofer] screen is not displayed.
General
Prese
Present
Not Present
Select Exit
ENTER SETUP
General
Present Prese
Not Present
ENTER Select SETUP Exit
General
Prese
Present
Not Present
Select Exit
ENTER SETUP
* Factory setting