Pioneer DV-K302CD Operating Instructions Manual page 25

Setting digital audio connections
to an AV amplifier or decoder
The [Digital Jack] screen establishes whether digital
connections have been made to an AV amplifier,
receiver, or external decoder. As there are numerous
options available, please refer to the instructions
supplied with the component the player is connected to
to determine what digital audio formats can be decoded.
If you have made no digital connections, select "Not
Connected".
Audio1 2 Video Language
Setup Navigator
Amp Connection
Digital Jack
Compatible with Dolby Digital
Move
ENTER
Settings: Dolby Digital*
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
Note
The Karaoke function cannot be used with the DIGITAL OUT
jack.
Setting compatibility with 96 kHz
output
The [96 kHz PCM Audio] screen establishes whether or
not the AV component the player is connected to is
capable of processing an audio signal with a sampling
rate of 96 kHz. This screen only appears if connections
have been made to an external AV component as
determined in previous screens.
Audio1 2 Video Language
Setup Navigator
Amp Connection
96 kHz PCM Audio
Digital jack not compatible with 96 kHz
Move
ENTER
Settings: No*
Select if the connected AV component cannot
process an audio signal with a sampling rate of
96 kHz.
Yes
Select if the connected AV component can
process an audio signal with a sampling rate of
96 kHz.
Don't Know
Select if you are uncertain whether the
connected AV component can process an
audio signal with a sampling rate of 96 kHz.
General
Dolby Digital
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
Select Exit
SETUP
* Factory setting
General
No
Yes
Don't Know
Select Exit
SETUP
* Factory setting
Confirming the settings
The [Exit Setup Navigator] is the final screen in the Setup
Navigator.
Audio1 2 Video Language
Setup Navigator
Exit Setup Navigator
Confirm setup adjustments
Move
ENTER
Settings: Valid*
Select to have the player make all of the
necessary audio, video and language settings
according to your responses in the Setup
Navigator.
Invalid
Select to exit the Setup Navigator without
changing any of the system settings.
Redo
Select to return to the [OSD Language]
(Chinese model only) or the [TV Type] screen of
the Setup Navigator and do the settings again.
To exit the Setup screen
When you have completed setting up the player using
the Setup Navigator or if you exit the Setup Navigator,
the Setup screen General menu appears. Press Setup
to close the Setup screen.
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup
screen menus is described on page 30 and 31.
General
Valid
Invalid
Redo
Select Exit
SETUP
* Factory setting
25