Setting Analog Audio Connections To An Av Amplifier Or Receiver - Pioneer DV-S88A Operating Instructions Manual

Setting analog audio connections
to an AV amplifier or receiver
The [Analog Jacks] screen establishes whether analog
connections have been made to an AV amplifier or
receiver, and if connections are made, whether the
connections made are for 2 channel stereo or for 5.1
channel surround sound.
Audio1 Audio2
Setup Navigator
Amp Connection
2 channel jacks for L/R
Settings: 2 Channel*
Select if you have made 2 channel
connections to an amplifier or receiver.
5.1 Channel
Select if you have made 5.1 channel
connections to an AV amplifier or receiver
with the appropriate inputs. When this
setting is selected, several screens will
follow to determine the configuration of your
speaker system. These screens are
described in the section 'To coordinate your
speaker system for 5.1 channel output' on
this page.
Not Connected
Select if you have not made connections to
an amplifier or receiver or if you have made
stereo connections to a TV or monitor.
22
En
Video Language General
2 Channel
Analog Jacks
5.1 Channel
Not Connected
Move Select Exit
ENTER SETUP
* Factory setting
To coordinate your speaker system for 5.1
channel output
When [5.1 Channel] is selected in the [Analog Jacks]
screen, the following screens appear to determine the
configuration of your speaker system. In all of the
following screens, select [Present] if the speaker in
question is present in your system, and [Not Present] if
it is not.
[Center Speaker]
Audio1 Audio2 Video
Setup Navigator
Amp Connection
Center Speaker
Center speaker is connected
to an amplifier
Move ENTER
[Surround Speakers]
Audio1 Audio2 Video
Setup Navigator
Amp Connection
Surround Speakers
Surround speakers are connected
to an amplifier
Move ENTER
[Sub-woofer]
Audio1 Audio2 Video
Setup Navigator
Amp Connection
Sub-woofer
Sub-woofer is connected
to an amplifier
Move
ENTER
Settings: Present*
Not Present
Language General
Present Prese
Not Present
Select SETUP Exit
Language General
Present
Not Present
Select SETUP Exit
Language General
Present
Prese
Not Present
Select Exit
SETUP
* Factory setting