Setting The Parental Lock Level - Pioneer DV-K302CD Operating Instructions Manual

Setting the Parental Lock
Level
This player lets you set the Parental Lock if the DVD has
a parental lock level recorded on it. With Parental Lock
capable discs, you can block access to material you feel
is inappropriate for your children. Refer to the DVD disc
jacket and the accompanying documentation to see if a
particular disc contains a parental lock level.
Make changes to the [Parental Lock] setting in the Setup
screen General menu. Please note that changes to the
Parental Lock level cannot be made when a disc is
playing. Stop playback of the disc before attempting to
make any changes.
Audio1 2 Video Language
Setup Menu Mode – Basic
Setup Navigator
Parental Lock
Setup viewing restrictions
Move
Settings: Level Change (For information, refer to
"Setting the Parental Lock level" on the
following page.)
Password Change (For information, refer to
"Changing the password" on the following
page.)
When a DVD with a set Parental Lock level is
loaded
Playback cannot be started until the password has been correctly
input by using the cursor buttons (2/3/5/∞) or the number
buttons on the remote control, and ENTER has been pressed.
Parental Lock: Register Code Number
– –
Current Level
Disc Level
Move Available Till Stop
+/–
RETURN
General
Level Change
Password Change
SETUP Exit
– –
: Level3
: Level6
Return Exit
SETUP
Entering the password
When you select either "Level Change" or "Password
Change", it is necessary to enter the password (4-digit
code number). Use the following steps at any time you
are asked to enter or confirm your password.
1
Use the cursor buttons (5/∞) or the number
buttons on the remote control to select a
number between 0 and 9.
You can also use the number buttons to enter the
numbers directly. When entering your password for
the first time, or changing it, you will be asked to
reenter your password. When using the number
buttons to confirm the password, the numbers
appear as asterisks, and the cursor advances
automatically to the next position.
Audio1 2 Video Language
Parental Lock: Register Code Number
– –
Enter 4–Digit Code
Move
+/–
RETURN
2
Use the cursor buttons (2/3) to move the
cursor to a different position in the password.
When all four numbers of the passoword have been
entered, ENTER appears on the screen.
Audio1 2 Video Language
Parental Lock: Register Code Number
1 0
Enter 4–Digit Code
Move
+/–
RETURN
3
Press ENTER to set the new password.
The password is entered.
Note
Be sure not to forget your password. If you should forget it,
reset the system, and enter a new password. To reset the
system, see 'Resetting the Player to System Settings' (page 56).
Please note that this procedure resets the system, and clears all
saved settings, not just the password.
General
– –
Return Exit
SETUP
General
1 9 ENTER
Return SETUP Exit
51