TP-Link TL-WR902AC User Manual page 61

TL-WR902AC AC750 Wireless Travel Router
The WPS Configuration Screen of Wireless Adapter

Note:
In this example, the default PIN code of this adapter is 16952898 as the above figure shown.
Step 2: Keep the WPS Status as Enabled and click the Add Device button.
Step 3: Choose "Enter the new device's PIN" and enter the PIN code （take 16952898 for
example） of the wireless adapter in the field after PIN as shown in the figure below. Then click
Connect.
Method Three: Enter the PIN from my AP.
Step 1: Get the Current PIN code of the AP (each AP has its unique PIN code. Here takes the PIN
code 12345670 of this AP for example).
Step 2: For the configuration of the wireless adapter, please choose "Enter the PIN of my access
point or wireless router" in the configuration utility of the WPS as below, and enter the PIN code
of the AP into the field after "Access Point PIN". Then click Connect.
- 47 -