TP-Link TL-WR902AC User Manual page 147

11gn mixed - Select if you are using both 802.11g and 802.11n wireless clients.

11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.

It is strongly recommended that you set the Mode to 11bgn mixed, and all of 802.11b/g/n
wireless stations can connect to the Router.
Channel Width - Select any channel width from the pull-down list. The default setting is

automatic, which can automatically adjust the channel width for your clients.
WDS Mode –

Survey - Click this button, you can search the AP which runs in the environment.

WDS Mode -

Click Survey button on the Wireless page, and then AP List page will appear as shown below.
Find the SSID of the network you want to extend, and click Connect in the corresponding row.
Be sure to click the Save button to save your settings on this page.

Note:
1. The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.
Near the center of the area in which your wireless stations will operate.

In an elevated location such as a high shelf.

Away from the potential sources of interference, such as PCs, microwaves, and cordless

phones.
Away from large metal surfaces.

2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.
TL-WR902AC AC750 Wireless Travel Router
- 133 -