System Tools; Working Mode - TP-Link TL-WR902AC User Manual

Click the Save button.
3.
Click the Enable/Disable All button to make all entries enabled/disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the
previous page.
5.7

System Tools

Choose menu "System Tools", and then you can see the submenus under the main menu:
Working Mode, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore,
Reboot, Password and System Log. Click any of them, and you will be able to configure the
corresponding function. The detailed explanations for each submenu are provided below.

5.7.1 Working Mode

Choose menu "System Tools → Working Mode", check Control the system mode by
software and then you can see the following screen.
TL-WR902AC AC750 Wireless Travel Router
- 121 -