Pioneer DRM-604X Driver Installation Manual page 65

Appendix D
Comand Error Messages
Return Error
R (GOOD)
E00 Communication Error
E04 Feature not Available
E06 Missing Argument
E11 Disc not Present
E12 Address Error
E13 Focus Error
E14 Spindle Unlocked
E16 Eject Received
E90 Panic - Mechanical
E91 Can't Eject Magazine
E92 Can't Load
E96 Can't Start
E99 Panic
Example
To instruct the CD-ROM Changer to Load Disc 3 and start playing from 21m 34s
16bl, use this command string: 3ZSSABK213416SEPL<CR>.
Here is a fuller explanation of each command in the example above:
3ZS: Load Disc 3
SA: Start rotation
BK: Block Addressing Mode
213416SE: Search to 21 Minutes, 34 Seconds, 16 Blocks
PL: Begin Play.
Owner's Manual / Software Driver Installation Guide
(CDP) CD Player Commands
Explanation
The command completed successfully.
Error in command, command too long
Unusable command, wrong mode, bad track
A required parameter was not supplied
No disc loaded, magazine not inserted
Search address not found
Focus lost (Hardware problem)
The spindle is not locking
Front panel Eject button pressed before the command
could finish execution.
A non-recoverable error has occurred in a mechanical
operation such as loading.
Drive was unable to spin-up the disc
A non-recoverable operational error has occurred.
D-5