Pioneer DRM-604X Driver Installation Manual page 62

(CDP) CD Player Commands
The following lists the Command Mnemonics and an explanation for each:
CM Command
?A Address Request
?B Block Request
BK Block Mode
CL Clear
?G Catalog Request
?I Index Request
IX Index Mode
?K Disc Status
Request
N1: Disc Loaded
N2: Audio Track
N3: Data Track
N4: CDV
N5: CD-I
N6-8: Reserved
D-2
Drive Action
Returns a 10-digit string (TTIIMMSSFF) representing Track
number, Index number, and P-code time for the current
address. In Park mode, the string is XXXXXXXXXX, at
lead-in 0000000000. At lead-out, the string is AA01000000.
Returns a six digit string representing the current address in
MMSSFF format. In Park mode, XXXXXX is returned.
000000 is returned when the current address is in lead-in area.
Sets the addressing mode to Block mode. All subsequent
addresses must be in MMSSFF format.
Clears the buffer which stores the stop marker. Will also
cancel search mode or play modes.
Returns the disc's 13 digit catalog number. If the disc does
not have a catalog number, or if no disc is loaded, the string
will be all "X"s.
Returns a four digit string representing the track number and
index number. In Park mode, XXXX is returned. 0000 is
returned when the current address is in the lead-in area, and
AA01 when in the lead-out area.
Sets the addressing mode to Index mode. All subsequent
addresses will be interpreted as indices.
Returns an eight character string representing the attributes
of the currently loaded disc. (N1 - N8)
0: No
0: Not Present
0: Not Present
0: No
0: No
(All X)
Software Driver Installation Guide / Owner's Manual
Appendix D
1: Yes X: Unknown
1: Present X: Unknown
1: Present X: Unknown
1: Yes X: Unknown
1: Yes X: Unknown