Using Cld Remote; Figure 23 - Cld Menu Icon; Figure 24 - Macintosh Cld Remote - Pioneer DRM-604X Driver Installation Manual

MACINTOSH Driver Installation

Figure 23 - CLD Menu Icon

Using CLD Remote

There is one utility program included with the Macintosh Pioneer CD-ROM drivers.
This is CLD Remote, a remote control program for the Macintosh that can be used to
control CD Audio discs.
When CLD Remote is opened, the controller screen for CD-ROM changer appears if
the drivers are installed, the CD-ROM Changer is attached to the Macintosh via SCSI
and powered ON. You will see this screen:
F
A
B
C

Figure 24 - MACINTOSH CLD Remote

Here are descriptions of the CLD REMOTE indicators and control panel:
This indicates the title of the Audio CD and Track number currently playing.
A —
B — These numbers indicate the SCSI ID (1-6) of the drive; the disc tray in which
the active Audio CD is in (1-6); the track number that is currently playing; and the
elapsed time of the track, if DISC TIME is selected under the FILE MENU.
Note: If Absolute Time is selected in the File Menu, this time number will indicate
total time that has elapsed during playback of the CD.
The top bar indicates the elapsed time within the track (Disc Time) and the
C —
bottom bar indicates the elapsed time within the entire CD (Absolute Time).
This is a volume control.
D —
Owner's Manual / Software Driver Installation Guide
(Descriptions are continued on next page.)
Chapter 4
E
D
4-7