Pioneer DRM-604X Driver Installation Manual page 61

Appendix D
Using CDP Commands / CDP Command List
Sending CDP (CD Player) Commands from DOS :
At the DOS prompt, type the following:
C:\>ECHO 1KL>CDP <CR>
This will send a command to the CD-ROM Changer to put Key Lock ON, so that
the Magazine cannot be ejected. 0KL will turn Key Lock OFF. See complete list
of CDP Commands starting on page D-2. Any of the CDP Commands can be
used in place of the 1KL in the above set of instructions.
Use the Multi-Player Control Program (MPC) described in Chapter Three,
page 3-16 to send CDP commands to the CD-ROM Changer.
CDP (CD-Player ) Control Commands
Player Commands
Addressing Modes
Block MMSSFF
Index I I
Time MMSS
Track TT
Player Modes
P00 Home
P01 Park
P03 Stop
P04 Play
P06 Pause
Owner's Manual / Software Driver Installation Guide
For Pioneer CD-ROM Changers
(Carriage return or enter)
Specifies Minutes, Seconds, and Frames.
Specifies pre-mastered indices
Specifies Minutes and Seconds (Frame 0)
Specifies the beginning of track TT
No disc is loaded. Magazine inserted.
The disc is loaded, but not spinning.
The drive is playing audio.
The disc is spinning, but audio play pauses.
(CDP) CD Player Commands
D-1