Selection Methods - Pioneer DRM-604X Driver Installation Manual

Chapter2
Selection methods for IBM-PC & compatible users
The table below indicates how to select/deselect menu options and how to move
around in the installation screens when installing the IBM-PC DOS/Windows drivers:
Action
Move to another Menu
Edit a Menu selection
Using the Mouse to make
a Menu Selection
Confirm the Menu
Selection
Bring up an adjacent
menu
Confirm an Adjacent
Menu selection
Return to DOS
[F3]
Owner's Manual / Software Driver Installation Guide
Key Stroke
Use the Up and Down
selection Down [SHIFT-TAB] for Up until the correct menu
selection becomes highlighted. You can also roll the mouse
until the cursor appears on the line you wish to change, then
click the left mouse button.
Go back one Menu screen Press the "Esc" key or click the
right mouse button.
There are four ways to edit a menu item:
1. Press the [GREY +] sign on the keyboard number pad.
2. Press the [SPACE BAR] then type the new entry.
3. Press the [INS] key then type the new information.
4. If you're using a mouse, with the cursor over the selection
you wish to change, Click the left mouse button then type
in the new information.
Click or Double Click
Moving to the next line using the Down arrow key will
confirm your selection.
Press the [SPACE BAR] or press the [F3] key.
Press [ENTER].
Select "Exit" from the Installation Menu
Accesses the Help Screens for currently highlighted item.
(See page 2-2 for details about using On-Line Help.)
Pre-Installation Notes
Arrow Keys or the [TAB] for
2-3