Installing Drivers For System 6.0.7 & Below - Pioneer DRM-604X Driver Installation Manual

MACINTOSH Driver Installation Chapter 4
This is the message you will see when installation is completed successfully:
Mac
Figure 21 - MACINTOSH - Successful Install Screen
Click on QUIT, to leave the installer. NOTE: Replace any virus protection
software or other inits you may have removed for this installation back into the
System Folder. Restart your computer.
Installing drivers for System 6.0.7 and below
You will need to click on specific files and drag them into the System Folder if
you are using System 6.0.7 or below. NOTE: ONLY use the installer for
Macintosh Systems 7.0 and above.
Double click to open the Pioneer Macintosh diskette that ships with your Pioneer
CD-ROM Changer. Then double click on the 6.0.7 Folder, to open it. Inside this
folder you will see the file CLD Access 1.2. Highlight this file, hold the mouse
button down, and drag it over the System Folder icon for System 6.0.7 or below.
When the System Folder is highlighted, you can release the mouse button.
Then double click on the CD-ROM Folder contained on the Pioneer diskette.
Select these four files by clicking on them, while simultaneously holding down
the shift key: Audio CD Access, Foreign File Access, ISO 9660 File Access, and
High Sierra File Access. When they are all highlighted, drag them over the
System Folder icon for System 6.0.7 or below. As described above, when the
System Folder is highlighted, you can release the mouse button.
4-4 Software Driver Installation Guide / Owner's Manual