Pioneer DRM-604X Driver Installation Manual page 58

DOS/WINDOWS Device Driver & MSCDEX File Appendix C
NOTE: The /N: switch (indicating the number of discs to access within the
changer) and the /S:switch (indicating the SCSI ID of the changer) are
automatically determined by the Install Program, and will not usually appear in the
command line. They can be manually added, but if they are indicated in this line,
the /S: switch MUST match the SCSI ID on the back of the unit. The /N: switch
default is 6, but a number from 1 to 6 can be set. If /N:3 is indicated, only the first
three discs in the drive will be assigned drive letters and will be accessible.
NOTE: For information about daisy-chaining drives and about using the XDISC
utility, see Chapter 3, pages 13-15.
See page C-2 for a descriptions of the Device Driver Command Line Switches.
See page C-3 for a description of the MSCDEX Command Line Switches
C-2 Software Driver Installation Guide / Owner's Manual