Erasing A Cd-Rw Disc - Pioneer PDR-W37 Elite Operating Instructions Manual

Compact disc recorder / multi-cd changer
Hide thumbs Also See for PDR-W37 Elite:
Table of Contents

Advertisement

Erasing a CD–RW disc
Although more expensive than CD-R discs, the great advantage of
CD-RW is that the discs can be erased and reused. Various erase
options are available depending on whether or not the disc has
been finalized.
A third, special option, erases (re-initializes) the whole disc. This
process takes quite a long time to complete and should be used for
recovering damaged discs, not for erasing tracks from a healthy
disc.
Caution!
Never switch off the power during CD-RW erasing — the disc may
be damaged as a result.
If the message
appears any time during any erase
CHECK DISC
process, hit eject, take out the disc, clean it, then try the erase
command again.
Be sure to remove the disc from the recorder before switching off
the power, otherwise the erase operation will not be completed.
◊ÛB¿ˆ≤≥
COMPACT DISC RECORDER / MULTI-CD CHANGER
3
- COMPACT DISC MULTI CHANGER
6 Finalizing and Erasing
COMPACT DISC DIGITAL RECORDER
ERASE
4 1
6
CD TEXT
When a non-finalized disc is loaded:
1
Press ERASE.
Use the jog dial (or press 41 or
2
¡ ¢) to change the erase option.
Switch between:
• Erase just the last track
ERASE
LAST
• Erase all tracks
ERASE
ALL
• Erase multiple tracks (erase from track ... to track ... )
ERASE
O2–1O ?
Keep pressing 4 1 (or ¡¢) to change the
'erase from' track— the 'erase to' track is always the last
track.
• Press 7 or
again to cancel erase here.
ERASE
Press 6 (CD-R side).
3
4
Eject or finalize the disc.
You must eject, then re-insert the disc if you want to record
any new tracks. See Finalizing a disc on page 30 if you
have finished all the recording and editing that you want do
to.
REC VOL
¡ ¢
7
PUSH ENTER
Hi-bit Legato Link Conversion
CD-RW
?
CD-RW
?
CD-RW
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents