Erasing A Cd-Rw Disc; When A Non-Finalized Disc Is Loaded - Pioneer PDR-609 Operating Instructions Manual

1
◊ÛB - >?/
SCROLL TIME AUTO MONITOR
MANUAL
TRACK NO.
WRITE
AUTO INPUT
ERASE FINALIZE
MANUAL SELECTOR
2
DIGITAL ANALOG
REC LEVEL REC LEVEL
PUSH ENTER
ANALOG
L REC BALANCE R
MENU/
TEXT
DELETE
SYNCHRO
Legato Link Conversion
CD TEXT
3
Erasing a CD-RW
disc
Although more expensive than CD-R discs,
the great advantage of CD-RW is that the
discs can be erased and reused. Various
erase options are available depending on
whether the disc has been finalized.
A third, special option, erases (re-
initializes) the whole disc. This process
takes quite a long time to complete and
should be used for recovering damaged
discs, not for erasing tracks from a healthy
disc.
Caution!
Never switch off the power during CD-RW
erasing - your disc may become unusable.
If the message appears any
CHECK DISC
time during any erase process, press 0,
take out the disc, clean it, then try the
erase command again.
Be sure to remove the disc from the
recorder before switching off the power,
otherwise the erase operation will not be
completed.
6 More recording features
When a non-finalized
disc is loaded
1 Press ERASE.
The display shows
ERASE LAST?
• Press 7 to cancel last track erase here.
Use the jog dial or press 4
2
and ¢ on the remote control
to change the erase option.
Switch between:
– erase just the last track
ERASE LAST?
– erase all tracks
ERASE ALL?
–[
ERASE 02 LAST TRACK
track 2 and all subsequent tracks
–[
ERASE 03 LAST TRACK
track 3 and all subsequent tracks
Keep turning the jog dial or press 4
and ¢ on the remote control to change
the number of tracks to erase.
Press 8 (6 on the front
3
panel) to start erasing.
The process takes just a few seconds.
During this time, the function indicator
lights.
4 Eject or finalize the disc.
You must eject, then re-insert the disc if
you want to record any new tracks. See
Finalizing a disc on page 26 if you have
finished all the recording and editing that
you want do to.
.
]? – erase
]? – erase
37
En