Un-Finalizing' A Cd-Rw Disc; Erasing All Tracks From A Finalized Cd-Rw Disc - Pioneer PDR-F10 Operating Instructions Manual

'Un-finalizing' a CD-RW disc

Use this option to return a finalized CD-RW
disc to a non-finalized state, without erasing
any tracks.
1 Press CD-R MENU.
Use 4 or ¢ to select ERASE
2
MODE then press SET.
Use 4 or ¢ to select ERASE
3
TOC? then press SET.
4 Press SET again to start erasing.
Disc erase takes a few minutes to complete.
• Press to cancel instead of
CANCEL
erasing.
5 When erasing is complete, press
/ .
OPEN CLOSE
This completes the operation and makes the
disc ready for recording.
6 More Recording Features
Erasing all tracks from a
finalized CD-RW disc
Use this option to erase all tracks from a
finalized disc. In fact, only the TOC (table of
contents) is erased, so this is much faster than
the disc erase option on page 32.
1 Press CD-R MENU.
Use 4 or ¢ to select ERASE
2
MODE then press SET.
Use 4 or ¢ to select ERASE
3
ALL then press SET.
4 Press SET again to start erasing.
Erasing takes a few minutes to complete.
• Press to cancel instead of
CANCEL
erasing.
5 When erasing is complete, press
/ .
OPEN CLOSE
This completes the operation and makes the
disc ready for recording.
33
En