Fluke MicroScanner 2 User Manual page 15


On/off key.
  
, : Navigates through screens and changes
settings. In toner mode, these keys cycle through the
IntelliTone and analog toner songs.
 
: Selects the RJ45 or coaxial connector as the active
port.
 
: Cycles through the cable test, toner, and PoE
detect modes.
For additional modes, hold down keys while turning the
tester on:

 
+ : Lets you calibrate length measurements and
select meters or feet as the length unit.

 
+ : Activates a demonstration mode where the
tester shows examples of test result screens.
Auto shutoff is disabled in demonstration mode.

 
+ : Displays the version and serial number
screens.
Note

LCD display with backlight.
 F-connector for connecting to 75  coaxial cable.

Modular jack for connecting to telephone and twisted
pair network cable. The jack accepts 8-pin modular
(RJ45) and
6-pin modular (RJ11) connectors.

Wiremap adapter with F-connector and 8-pin modular
jack. See page 10.

Optional remote ID locator with F-connector and 8-pin
modular jack. See page 10.
MicroScanner 2 Features
7