Features And Controls - Briggs & Stratton 030547-01 Operator's Manual

Features and Controls

Read this Operator's Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
A - Rocker Switch — Set this switch to ON (I) before
using recoil starter. Set switch to OFF (0) to switch
off engine.
B - 120 Volt AC, 30 Amp Travel Trailer Receptacle
— May be used to supply electrical power for the
operation of 120 Volt AC, 30 Amp, single phase,
60 Hz electrical, travel trailer loads.
C - Circuit Breakers — Push-to-reset circuit breakers
are provided to protect the generator against
electrical overload.
D - 120 Volt AC, 20 Amp, Duplex Receptacle —
May be used to supply electrical power for the
operation of 120 Volt AC, 20 Amp, single phase,
60 Hz electrical, lighting, appliance, tool and motor
loads.
E - Oil Fill Cap — Check and add engine oil here.
F - Oil Drain Plug — Drain engine oil here.
G - Grounding Fastener — Consult your local agency
having jurisdiction for grounding requirements in
your area.
H - Spark Arrester Muffler — Exhaust muffler lowers
engine noise and is equipped with a spark arrester
screen.
J - Recoil Starter — Used to start the engine
manually.
K - Air Cleaner — Protects engine by filtering dust
and debris out of intake air.
L - Choke Lever — Used when starting a cold engine.
M - Fuel Valve — Used to turn fuel supply on and off to
engine.
N - Fuel Tank — Capacity of four (4) U.S. gallons
(15.14 l).
Items Not Shown:
Engine Identification — Provides model, type and
code of engine. Please have these readily available if
calling for assistance.
Identification Label — Provides model and serial
number of generator. Please have these readily
available if calling for assistance.
N
M
L
K
J
H
15