Managing Omniswitch 6350 Stacks; In This Chapter - Alcatel-Lucent OmniSwitch 6350 Hardware User's Manual

In addition to their working as individual stand-alone switches OmniSwitch 6350 switches can also be
linked together to work as a single virtual chassis known as a stack. With stacks, users can easily expand
their switching capacity simply by adding additional switches to the stack. In addition, stacks provide
enhanced resiliency and redundancy features. For more information, refer to

In This Chapter

This chapter provides information on OmniSwitch 6350 switches configured to operate as a single virtual
chassis. Topics described in the chapter include:
OmniSwitch 6350 stack overview on
•
Roles within the stack on
•
Stack cabling on
•
Slot numbering on
•
Hot-Swapping modules in a stack on
•
Reloading switches on
•
Changing the secondary module to primary on
•
Synchronizing switches in a stack on
•
Stack Split Detection (SSP) on
•
Monitoring the stack on
•
Note. You can also manage and monitor OmniSwitch 6350 stacks through WebView, Alcatel-Lucent
Enterprise's embedded web-based device management application. WebView is an interactive and easy-
to-use GUI that can be launched from OmniVista or a web browser. Please refer to WebView's online
documentation for more information.
OmniSwitch 6350 Hardware Users Guide
OmniSwitch 6350 Stacks
page
page 7-3.
page 7-16.
page 7-19.
page
page 7-26.
page
page 7-37.
page 7-40.
April 2017
7 Managing
7-2.
7-24.
page 7-34.
7-36.
page 7-2.
page 7-1