EXCELL PRECISION CO., LTD.
2-3-1 Automatic Backlight Function Setting
Select
in the General Function setting mode
function setting.
ACTIONS
Press
TARE
Use
ON/ZERO
key to select function
"on" or "off
Press
TARE
Key in the parameter "00"
Press
TARE
complete the general
setting procedures
Automatic backlight function
When the scale is idle near zero (< 10d) without any key being pressed for 10
seconds, it will automatically disable the backlight. To activate the backlight,
place weight over 10d or press any key.
02026010
DISPLAY
key
or
UNITS
key
key to
NOTE
LCD displays the last saved status
11
to change the backlight
ZSME300000369