Table of Contents
Advertisement
What's Next?
You are now finished installing the CMS hardware and
connecting the necessary equipment.
Before you can use your voice announcement unit, you must
record an announcement. Follow the instructions that came
with your unit to record a clear, informative message.
If you choose to connect the optional AT&T 473 printer,
follow the installation directions that come with that unit.
Before you can use your Call Management System, you must
install the CMS software, which comes in the CMS software
package. Instructions on installing and administering the
CMS software are in the section titled Administration Manual
in the three ring binder that came with your CMS software
package.
Place this guide in the back of that binder and keep it handy
in case you need to refer to the installation instructions
again.
Call Management System Installation Guide
21
Advertisement
Table of Contents
