Table of Contents
Advertisement
Connecting the PC to the Voice
Announcement Unit
Follow these procedures for connecting the PC to the voice
announcement unit. To connect the two units, you need a 14-
foot tape unit cord, provided in either the CMS hardware
package or the Voice Announcement package.
Set up your voice announcement unit by following the
1
instructions that came with the unit.
Turn your PC so you can see the three jacks in the CMS
2
expansion card.
Using the cord provided, connect the voice announcement
3
unit to the top jack (labeled AUX) on the expansion card.
Figure 11 shows how the voice announcement unit is connected
to the CMS expansion card.
FIGURE 11 Connecting the expansion card and the voice
announcement unit
20
Call Management System Installation Guide
To ac
outlet
Advertisement
Table of Contents
