Omron NS12 Quick Start Manual page 33

OMRON
1
Once the label is typed (e.g. Lamp), click the [OK] button to close this Bit Lamp
window.
3.6.2.3 Thumbwheel Switch
Create one more object, the Thumwheel Switch. To do that, choose the object from
Functional Object list, draw it on the screen and double click on it. In the [General] tab
you can configure the following settings:
(1) Display Type is set to "Decimal".
(2) Storage Type is set to "UINT(unsigned 1 word)". That means that now the
numeral range can be between 0-65535 (see the mark 3).
(4) Format is set to 4 integer and 0 decimal.
(5) The address where this object writes to and reads from is default; $W0
NS Series Quick Start Manual
3
2
Page 33