Omron NS12 Quick Start Manual page 10

OMRON
3. You are already in the [Initialize] tab (the first tab). Press the [Screen Data Area]
button.
4. The warning message will be displayed. Press the Yes Button to format the
screen data. Do not turn OFF the power while formatting is in progress.
The time required for formatting depends on PT model The NS8 finishes
formatting instantly.
5. When formatting has been completed, the message will be displayed. Press the
OK Button.
6. Select the [PT Settings] tab. Set the time and date.
7. Press the date display area under the heading "Calendar Check". A dialog box
will be displayed. Input the date in yyyy/mm/dd format.
Example: Enter January 1st, 2000 as 2000.1.1.
8. Press the time display area under the heading "Calendar Check". A dialog box
will be displayed. Input the time using a 24-hour clock in hours/minutes/seconds
format.
Example: Enter 06:01:01 p.m. as 18.1.1.
9. The red [Write] button is the lower right corner in the [PT Settings] tab. The write
operation is not needed because the time and date settings will be enabled
immediately after they have been input in the dialog box.
Page 10
NS Series Quick Start Manual