How To Debug A Project - Omron NS12 Quick Start Manual

OMRON
4

How to debug a project

The project can be tested by selecting [Tools] - [Test...] or pressing Ctrl+T. This
feature is included in the NS-Designer and it is very powerful tool for testing the whole
project.
First the project and screens must be saved. Then the [Test] window will appear:
By selecting "Minimize NS-Designer", the NS-Designer will be minimized when Test
Tool starts. If selecting the "Start Test from Current Screen", the Test Tool will open
the screen which was opened in the NS-Designer. Clicking on Start-button, the Test
Tool will start and functions can be tested by clicking on the objects, which are just
made on the screen.
There is also the Address list (in the Test Tool window) that shows the current values
of the addresses. Display types and contents can be change. If you want to change a
value, just select the address and double-click on it. The "Change Value"-window will
appear. You can change the bit state or write a new value to the word address.
Cancel will abort this action.
NS Series Quick Start Manual
Page 35