Omron NS12 Quick Start Manual page 12

OMRON
Memory Card
By using a memory card, screen data can be transferred faster than with Ethernet.
Before using Memory Card functions, please read more specific instructions
from NS-Series Setup Manual (V083-E1-xx), section 3-6 or NS-Series Operation
Manual (V074-E1-xx). First the data has been transferred from NS-Designer to the
Memory Card. By turning ON pin 6 of the DIP-switch and using a startup program the
PT is set to read screen data from a Memory Card.
System data can only be transferred using a Memory Card.
Note
Page 12
NS Series Quick Start Manual