Kyocera pdQ2 User Manual page 7

pdq2_QuickStart.book Page 3 Friday, July 28, 2000 6:37 PM
7. Wait until the message "Charging is complete" appears. Then unplug
2
the pdQ from the power cable.
Turning your phone on for the first time
Wait until the battery is fully charged before using your phone for the
first time.
1. With the flip closed, press and hold
the message "Powering on" on the screen.
2. Open the flip. Follow the procedures in the welcome screens to
calibrate the pdQ
instructed to do so. To prevent scratches, never use a pen, pencil, or
other sharp object to tap or write on the screen.
2
The pdQ is now ready to use.
2
NOTE: If the pdQ does not power on correctly, refer to Chapter 20—
Troubleshooting in the pdQ
find help" on page 50.
What to do first
2
. Use the stylus to tap the screen when you are
2
Reference Guide on the CD-ROM, or see "Where to
DRAFT
for a few seconds. You see
3