Table of Contents
Advertisement
pdq2_QuickStart.book Page 48 Friday, July 28, 2000 6:37 PM
an additional battery, if you wish, and charge it in the cradle along with
the phone.
Tips for improving battery performance
Select a shorter "Auto-off after" time on the General Preferences
screen. This feature turns off the PDA after a set number of minutes
of non-use. The shorter a time you select, the more energy is saved.
See "Entering information" on page 19.
Minimize the use of the backlight.
If you don't use the Beaming feature to receive data from other
devices, leave the Beam Receive setting at Off. See "Entering
information" on page 19.
If you don't plan to make or receive calls, you can use the PDA
without turning on the phone.
Do not disassemble or short-circuit the battery.
Keep the metal contacts at the base of the battery clean.
If you have not used an internal or external battery for more than a
month, recharge it before using it.
Do not charge any battery if the temperature is below 32ºF (0ºC) or
above 122ºF (50ºC).
Do not store any battery in hot areas for long periods of time. Use
these storage guidelines:
under 1 month: -4º to 140ºF (-20º to 60ºC)
over 1 month: -4ºF to 113ºF (-20º to 45ºC)
DRAFT
48
2
pdQ
User's Guide
Advertisement
Table of Contents
