Kyocera pdQ2 User Manual page 43

pdq2_QuickStart.book Page 39 Friday, July 28, 2000 6:37 PM
To use Data/Fax mode
Phone On
Flip Open
2
1. Slide the pdQ into the cradle. If the cradle is attached to the port you
use for HotSync operations, turn off HotSync on your computer. If
you are using a data cable and/or a different port than the one you
use for HotSync operations, it is not necessary to turn off HotSync.
2. Tap to display the Applications Launcher.
3. Tap to open Data/Fax mode.
You see status information beginning with "Initializing Modem" and
continuing to "Modem Ready."
4. From the computer, make the connection you want to initiate.
5. When you have finished the data or fax call, tap End or tap the
Applications Launcher and select a different application. The session
terminates automatically.
You can also Data/Fax mode on or off with the flip closed by selecting Network
from the Settings menu. For more information, see "Using Data/Fax mode" in the
2
pdQ Reference Guide .
Network connections
DRAFT
39