Kyocera pdQ2 User Manual page 12

pdq2_QuickStart.book Page 8 Friday, July 28, 2000 6:37 PM
What you see when the flip is open
Whether the phone is on or off, the PDA "wakes up" when you open the
flip. It displays the last application you used.
If you aren't sure whether the phone is on, roll the shuttle up. The status
bar appears at the top of the screen. Also, when the phone is on, the LED
flashes slowly.
After a few minutes of nonuse, the screen goes blank to save power. To
activate the screen, tap any button or close and open the flip.
Using the shuttle
The shuttle can be pressed in three ways: up, down, and in.
To use the shuttle (with the flip closed)
Roll the shuttle up or down to scroll through menu items.
Press the shuttle in to select a highlighted item.
Roll the shuttle up or down to adjust the earpiece volume during a
call.
To use the shuttle (with the flip open)
Roll the shuttle up or down to see phone and battery status at the top
of the screen.
Press the shuttle in to open the full-keypad Dialer.
DRAFT
8
2
pdQ User's Guide