Kyocera pdQ2 User Manual page 31

pdq2_QuickStart.book Page 27 Friday, July 28, 2000 6:37 PM
To make a call from Speed Dial (with the flip closed)
Phone On
Flip Closed
If you know the Speed Dial number
Press the Speed Dial number on the keypad and press
NOTE: If you have One-Touch Dialing enabled, press the Speed Dial number
on the keypad and hold down the final digit for a few seconds to place the call.
(To enable One-Touch Dialing, see "Setting up preferences" on page 35.)
If you need to look up the Speed Dial number
1. Press the shuttle in to open the menus. Roll the shuttle up or down
until Contacts is highlighted. Then press the shuttle in.
2. Roll the shuttle up or down until Speed Dial List is highlighted. Then
press the shuttle in.
3. Roll the shuttle up or down to scroll through the Speed Dial list. When
the person you want to call is highlighted, press
4. When you have finished your call, press
Using Speed Dial
.
.
.
DRAFT
27