7-11-5 Triggered Alarm List - Omron NV Series Programming Manual

Alarm Lists (NV4W/NV3Q)

7-11-5 Triggered Alarm List

Basic Operation
1,2,3...
12. Double-click the FS2 function switch and set the operation mode.
13. Transfer the screen to the PT.
14. Check operation. Words W30 and W31 are monitored so that when
W30.00 (bit 00 of W30) turns ON, message 0 will display an alarm. Mes-
sage A will be displayed when W30.10 (bit 10 of W30) turns ON. Message
D will be displayed when W30.13 (bit 13 of W30) turns ON. The control
address is set to word W16 so that when W16.00 (bit 00 of W16) turns ON,
recording is stopped. To delete all of the previously recorded data, turn ON
W17.00 (bit 00 of W17).
1. Place an Alarm List part on the base screen.
Section 7-11
Make the following settings,
and then click the OK Button.
Set the bit switch for indicat-
ing that a triggered alarm has
been acknowledged.
Operation
Mode: Others, To
Operate Alarm
Parts (Acknowl-
edge)
Color &
String: Set as required.
Alarm List Acknowledge data
is written to the PT after an
alarm is selected and the
Acknowledge Button is
clicked. This is used when a
record of an alarm that is
being acknowledged is to be
recorded.
Drag the Alarm List Part from
the standard parts library and
drop it on the base screen.
151