Delete curr. dest.
Enter location
Use to delete the destination that was en-
tered last (i.e. the current destination).
You will be asked to enter a new destina-
tion.
If your vehicle has been transported by
train or ferry, the new vehicle location will
need to be entered into the system. This
takes place automatically using GPS after
travelling a few hundred metres. If the sys-
tem cannot get a position fix automatically,
a position will have to be entered manually.
Note:
The new position must be a road junction
or a stored location.
From memory
You can enter a stored destination for your
current position. The destinations that are
suitable for entering as the new current
position are highlighted in colour.
City/Junction
You can enter the new position using the
following order: city, street, junction. Am-
biguous junctions also exist such as ring
roads. These are not suitable for the new
location entry.
30