Blaupunkt TravelPilot RGS 08 Operating Instructions Manual page 4

Control and display elements for the T ravelPilot RGS 08
1
Select characters,
switch on/off status bar in map,
exclude routes in traffic congestion menu.
2
Select characters,
page through lists,
change zoom range in map displays,
increase voice output volume for navigation.
3 SET Set selected characters,
change the monitor operation mode.
4
Select characters,
repeat voice output,
exclude routes in traffic congestion menu.
5
Select characters,
page through lists,
change zoom range in map displays,
decrease voice output volume for navigation.
6
Move cursor up,
switch between navigation and map display
7 ENT Enter key (confirmation)
8
Move cursor down,
call up traffic congestion menu during naviga-
tion
9
Header line
:
Input field
; Cursor is controlled using 6 and 8.
The arrows displayed with the cursor indicate the
direction(s) in which the cursor can be moved.
<
Selection field
=
Automatic brightness control
>
Basic brightness, can be adjusted by pressing
+ and –.
?
Contrast, can be adjusted by pressing + and –.
4