Grandstream Networks UCM6200 Series User Manual page 128

Call Forward No Answer
CFN Time Condition
Call Forward Busy
CFB Time Condition
Ring Simultaneously
Ring Simultaneously
External Number
Time Condition for Ring
Simultaneously
Other Settings
Ring Timeout
Firmware Version 1.0.0.1
Settings->Office Time/Holiday page.
Configure the Call Forward No Answer target number. If not configured,
the Call Forward No Answer feature is deactivated. The default setting is
deactivated.
Select time condition for Call Forward No Answer. The available time
condition are "Office Time", "Out of Office Time", "Holiday", "Out of
Holiday", "Out of Office Time or Holiday" and "Specific".
Note:

"Specific" has higher priority to "Office Times" if there is a conflict in
terms of time period.

Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.

Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Configure the Call Forward Busy target number. If not configured, the Call
Forward Busy feature is deactivated. The default setting is deactivated.
Select time condition for Call Forward Busy. The available time condition
are "Office Time", "Out of Office Time", "Holiday", "Out of Holiday", "Out of
Office Time or Holiday" and "Specific".
Note:

"Specific" has higher priority to "Office Times" if there is a conflict in
terms of time period.

Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.

Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Enable this option to have an external number ring simultaneously along
with the extension. If a register trunk is used for outbound, the register
number will be used to be displayed for the external number as caller ID
number.
Set the external number to be rang simultaneously. '-' is the connection
character which will be ignored.
Ring the external number simultaneously along with the extension on the
basis of this time condition.
Configure the number of seconds to ring the user before the call is
UCM6200 Series IP PBX User Manual Page 127 of 320