Control Panel Leds; Alert; Nic2; Nic1 - Supero 1042G-TF User Manual

A+ SERVER 1042G-TF User's Manual
3-3

Control Panel LEDs

The control panel located on the front of the SC818GTQ chassis has five LEDs.
These LEDs provide you with critical information related to different parts of the
system. This section explains what each LED indicates when illuminated and any
corrective action you may need to take.

Alert

The Informational LED signals status alerts.
State
Continuously on and red
Blinking red (1Hz)
Blinking red (0.25Hz)
Solid blue
Blinking blue
2

NIC2

Indicates network activity on LAN2 when flashing .
1

NIC1

Indicates network activity on LAN1 when flashing .
Informational LED
An overheat condition has occured.
(This may be caused by cable congestion).
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power supply.
Local UID has been activated. Use this function to locate the server in a
rack mount environment.
Remote UID is on. Use this function to identify the server from a remote
location.
3-2
Description