Serverboard Features; Processors; Memory; Serial Ata - Supero 1042G-TF User Manual

A+ SERVER 1042G-TF User's Manual
1-2

Serverboard Features

At the heart of the A+ SERVER 1042G-TF is one H8QGi+-F quad processor
serverboard, which is based on the SR5690/SP5100 chipset.
Below are the main features of the serverboards.

Processors

The H8QGi+-F supports four AMD Opteron 6000 series (AMD Socket G34)
processors. Please refer to our web site for a complete listing of supported
processors (www.supermicro.com).

Memory

The H8QGi+-F has thirty-two (32) single/dual/tri/quad channel DIMM slots
supporting up to 256 GB of ECC/Non-ECC UDIMM or up to 1 TB of ECC RDIMM
DDR3-1600/1333/1066 Mhz SDRAM. See Chapter 5 Section 6 for more details on
installing memory into the system.

Serial ATA

The South Bridge (SP5100) of the chipset includes a Serial ATA controller for six
3 Gb/s SATA drives. The hot-swappable SATA drives are connected to a backplane
that provides power, bus termination and configuration settings. RAID 0 and 1 are
supported. Refer to the support area of our web site for procedures on setting up
RAID on your system.

PCI Expansion Slots

The H8QGi+-F board has one PCI Express 2.0 x16 slot.

Ethernet Ports

An Intel® network controller is integrated into each of the serverboards to support
two Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45 output).

Onboard Controllers/Ports

Onboard I/O backpanel ports on the serverboard include one COM port, a VGA port,
two USB ports, a dedicated IPMI LAN port and two Gigabit LAN (NIC) ports.
1-2