Panasonic AG-UMR20P Operating Instructions Manual page 77

Memory card portable recorder
Hide thumbs Also See for AG-UMR20P:
Table of Contents

Advertisement

Displaying waveform
The waveform display (WFM) can be switched.
Press the
button while pressing and holding the SHIFT button in the recording screen.
≥ When [WFM TYPE] is set to [WAVE] or [VECTOR], each press of the button enables/disables WFM.
≥ When [WFM TYPE] is set to [WAVE/VECTOR], each press of the button switches the setting.
WAVE (wave display) # VECTOR (vector display) # Off
≥ WFM can also be switched by performing the menu setup for [WFM] or pressing the USER button assigned as
<WFM>.
(l
65, 222)
≥ WFM is not displayed on the external monitor.
≥ While WFM is displayed, information displayed on the unit's LCD monitor screen and the external output device's
monitor screen will be hidden. To display the information again, perform one of the following operations to turn off
the WFM function.
j Press the
button while pressing and holding the SHIFT button.
j Set the [WFM] menu to [OFF]
j Press the USER1 button assigned as <WFM>.
≥ This function is not available in the following cases:
j When using Focus Assist
j During Freeze Frame
j When color bars are displayed.
≥ [WFM] will be canceled in the following cases:
j If you turn the unit off
j If you press the MODE button
∫ To change the type of WFM
Select the menu.
: [DISP SETUP] # [WFM TYPE] # desired setting
[WAVE]:
[VECTOR]:
[WAVE/VECTOR]:
≥ This function is not available in the following cases:
j When using Focus Assist
j During Freeze Frame
j When color bars are displayed
∫ To change the display position of WFM
Select the menu.
: [DISP SETUP] # [WFM POSITION] # desired setting
[TOP/LEFT]/[TOP/RIGHT]/[BOTTOM/LEFT]/[BOTTOM/RIGHT]
≥ You can also change the waveform position to the upper left, upper right, bottom left or bottom right by performing
one of the following operations while a waveform is displayed:
j Press the
/
j Sliding the waveform while touching it.
(l
222).
(l
51)
(l
69)
(l
73)
Displays waveforms as waves.
Displays waveforms as vectors.
Switches the setting each time the applicable USER button is pressed.
(l
51)
(l
69)
(l
73)
buttons
- 77 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-umr20e

Table of Contents