Table of Contents
Advertisement
User management screen [User mng.]
The users and personal computers (IP addresses) that can access the unit from personal computers and mobile
terminals are registered in the User mng. screen [User mng.].
∫ User authentication settings tab [User auth.]
Click the [User auth.] tab of User mng. screen [User mng.].
Configure the user authorization settings for the personal
computers and mobile terminals that can access the unit.
≥ This item's setting is reflected when the [Set] button is
pressed.
User auth.
User authorization is set to "Off" or "On" here.
Factory settings: Off
Authentication
Specify the method of user authentication to use.
Enter the setting using the [Set] button.
Setting value:
Basic
Use basic authentication.
Digest
Use digest authentication.
Factory settings: Basic
≥ If you change the Authentication setting, close the browser and perform access again.
≥ We recommend selecting [Digest] to ensure communication security when connecting to a device that supports
DIGEST authentication.
≥ To prevent third parties from identifying user names and passwords, register new user name information (user
names and passwords) and delete the default user name information.
≥ We recommend creating a password of at least 8 characters, including at least 3 types of characters from digits
(single-byte), uppercase alphabetic characters (single-byte), lowercase alphabetic characters (single-byte), and
special characters.
User name [1 to 32 half-size characters]
The user name is input here.
Enter the setting using the [Set] button.
≥ The following characters can be displayed.
Half-size numeric characters
Half-size alphabetical
characters (upper and lower
cases)
Symbols
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
! # $ % ´ ( ) * + , - . / = ? @ [ ] ^ _ ` { } ˜
- 164 -
(l
130)
Advertisement
Table of Contents
